Timing belt Optibelt 3M 1041 (HTD)

OPTIBELT 3M 1041 (HTD) belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3M 1041 (HTD) and any equivalents.

This is the Optibelt Omega timing belt in profile HTD 3M with a length of 1041 mm and a pitch of 3 mm. The profile and the length are the two values you need to match before anything else. Read them directly off the old belt or the drive drawing.

HTD 3M is a synchronous belt profile with a 3 mm pitch. The 1041 mm figure is the belt length. On a timing belt, the profile and pitch must match the pulley grooves, and the length must match the drive's center distances and take-up. A belt that is close on length but wrong on profile will not seat correctly in the grooves.

If you are replacing a belt on an existing drive, the safest approach is to match the marking on the back of the old belt. If the marking is worn or unreadable, measure the length and identify the profile from the pulley teeth. You can then confirm the Optibelt Omega 3M 1041 against your drive.

When you request a quote, send the part number 3M 1041 (HTD) and, if you have it, the profile and length you measured. Our team replies by WhatsApp or email and can confirm the belt or suggest an equivalent.