Timing belt Optibelt 3600 8M SL 500

OPTIBELT 3600 8M SL 500 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3600 8M SL 500 and any equivalents.

The Optibelt 3600 8M SL 500 is a timing belt in the Omega series with an HTD 8M profile. Its 3600 mm length and 8 mm pitch identify the drive it fits, so the marking on the back of the old belt is the fastest way to confirm you are ordering the same size.

Profile and length are the two dimensions that decide fit on a synchronous drive. The HTD 8M profile sets the tooth form and the 8 mm pitch sets the spacing from tooth to tooth. The 3600 mm length is the belt's datum length around the pulley set. When you read those three values from the old belt, you have what you need to match the replacement.

If the back of the belt is worn or the print is gone, measure the length and check the pulley grooves against the HTD 8M profile before you order. Send the part number 3600 8M SL 500, or the profile and length you measured, and our team will confirm the belt or suggest an equivalent.

Timing belts are often replaced as a set with the pulleys and tensioner inspected at the same time. Belt wear, tooth damage or a glazed surface on a drive that has run hot are all reasons to look at the whole drive rather than the belt alone.