Timing belt Optibelt 345 5M 9
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- HTD
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 345 5M 9 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 345 5M 9 and any equivalents.
This Optibelt 345 5M 9 is an HTD timing belt in the 5M profile with a 345 mm length and a 5 mm pitch. HTD synchronous belts are used where the drive needs a fixed speed ratio without slip, such as on light industrial equipment and small motor-driven assemblies.
To confirm fit, compare the marking on the back of the old belt with this part number and check the profile and length against the drive. The 5M profile and 345 mm length must match what the pulleys and the application call for. A belt that is too long, too short or of the wrong profile will not sit correctly in the pulley grooves.
Inspect the pulleys and the rest of the drive before replacing the belt. Look for worn or damaged pulley teeth, misalignment and correct tension, since these conditions can shorten belt life. If the drive runs more than one belt, replace the set together so the load stays even across the belts.
For a quote, send the part number 345 5M 9 and the quantity you need by WhatsApp or email. Our team can confirm the belt and help you check the profile and length from your old marking.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 345mm
Frequently asked questions
- How do I confirm that the 345 5M 9 is the right belt for my drive?
- Read the marking on the back of the old belt and compare it with 345 5M 9. Also check that the profile is HTD 5M and the length is 345 mm against your drive requirements.
- What should I inspect when replacing this timing belt?
- Check the pulley grooves for wear or damage, confirm the pulleys are aligned, and set the correct tension. If the drive uses more than one belt, replace them as a set.
- How do I request a quote for the Optibelt 345 5M 9?
- Send the part number 345 5M 9 and the quantity you need by WhatsApp or email. Our team will reply promptly to confirm the belt.