Timing belt Optibelt 32 T5 / 4800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 T5 / 4800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 T5 / 4800 AFX and any equivalents.
The Optibelt Alpha Flex timing belt with part number 32 T5 / 4800 AFX is a synchronous belt built to a T5 profile. Its 4800 mm length and 5 mm pitch define how it fits the drive, so these are the first values to check against the belt you are replacing.
When you read a timing belt marking, the profile and the length do most of the work. The T5 profile sets the tooth shape and spacing, and the 5 mm pitch confirms the center-to-center distance between teeth. The 4800 mm length is the belt's datum length. A belt that matches on profile but not on length, or the reverse, will not run correctly on the same pulleys.
This belt is identified by the code 32 T5 / 4800 AFX and belongs to the Optibelt Alpha Flex series. It is a timing belt, also called a synchronous belt, so it is used where the drive needs the belt and pulleys to stay in step rather than rely on friction. The profile and length in the part number are the two figures to match first when checking a replacement.
To confirm this is the correct belt for your drive, send the full marking from the back of the old belt, including the profile, length and the code shown above. Our team can confirm the match or suggest an equivalent and provide a quote by WhatsApp or email.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 4800mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The T5 profile and 5 mm pitch describe the tooth geometry, and the 4800 mm length is the belt's datum length. Both values need to match the drive and pulleys for the belt to fit and run correctly.
- How do I confirm this is the right replacement?
- Read the marking on the back of the belt you are replacing and compare the profile, pitch and length with the T5, 5 mm and 4800 mm values listed here. Send us the full marking and we will confirm the match.
- What should I send to request a quote?
- Send the part number 32 T5 / 4800 AFX, or the complete marking from your old belt, by WhatsApp or email. We will reply with a quote and help confirm the right belt for your drive.