Timing belt Optibelt 32 T20 / 6200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 T20 / 6200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 T20 / 6200 AFX and any equivalents.
The Optibelt 32 T20 / 6200 AFX is an Alpha Flex timing belt with a T20 profile, a 6200 mm length and a 20 mm pitch. Before you fit it, inspect the drive so the new belt is not damaged by a fault that is still in place.
Check the sheaves first. Look for worn grooves, hooked or chipped teeth, runout on the shafts and correct alignment between the pulleys. Confirm the belt path is clear and that the tensioner, if the drive has one, moves freely through its range.
Then check the rest of the drive for the reason the old belt came off. A belt that failed early usually points to misalignment, a worn sheave or a tension problem rather than the belt itself. Correct those items first, then install the new belt and set tension to the drive manufacturer's specification.
If you are replacing more than one belt on the same drive, fit the set together so the load stays even. Have the belt marking ready when you contact us: 32 T20 / 6200 AFX, T20 profile, 6200 mm length, 20 mm pitch.
Dimensions
- Profile
- T20
- Pitch
- 20mm
- Length
- 6200mm
Frequently asked questions
- What does the marking on this belt tell me?
- The part is 32 T20 / 6200 AFX. It is an Optibelt Alpha Flex timing belt with a T20 profile, a 6200 mm length and a 20 mm pitch. Read the marking on the back of the old belt and compare it with these values.
- What should I check before fitting this belt?
- Inspect the sheaves for worn grooves, chipped or hooked teeth and runout, and check shaft alignment and the tensioner. Fix any fault in the drive before the new belt goes on.
- What do you need to quote this belt?
- Send the part number 32 T20 / 6200 AFX, or the profile, length and pitch from the old belt, by WhatsApp or email. If the marking is worn, send a photo of the belt and the drive and we will help confirm the right belt.