Timing belt Optibelt 32 T20 / 4600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 T20 / 4600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 T20 / 4600 AFX and any equivalents.
Matching a timing belt to the one being replaced starts with the marking on the back of the old belt. This Optibelt Alpha Flex belt carries the code 32 T20 / 4600 AFX, a T20 profile, a 4600 mm length and a 20 mm pitch. Use those four values to confirm the replacement before the drive is reassembled.
Read the old belt first. The profile and pitch must match the pulleys, and the length must match the drive's center distance and take-up. The Optibelt 32 T20 / 4600 AFX is a timing belt in the T20 profile with a 4600 mm length and a 20 mm pitch. If the marking on the back of the belt reads 32 T20 / 4600 AFX, this is the belt to quote.
If the marking is worn away, measure the old belt and note the tooth profile and the number of teeth, then compare those against the 20 mm pitch and 4600 mm length. A belt that is the wrong length will not tension correctly, and the wrong profile will not seat in the pulley grooves.
To request a quote, send the part number 32 T20 / 4600 AFX, the quantity, and a photo of the old belt marking if it is still legible. Our team replies by WhatsApp or email and can confirm the belt or suggest an equivalent.
Dimensions
- Profile
- T20
- Pitch
- 20mm
- Length
- 4600mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Compare the code on the back of the old belt with 32 T20 / 4600 AFX, and check the profile, the 4600 mm length and the 20 mm pitch against the drive. If the marking is gone, measure the old belt and count the teeth.
- What should I send to get a quote for this belt?
- Send the part number 32 T20 / 4600 AFX, the quantity you need, and a photo of the old belt marking if it is readable. We will confirm the belt or suggest an equivalent.
- Does this belt fit my machine?
- Fit depends on the pulley profile, the pitch and the drive length. This belt is T20 profile, 4600 mm long with a 20 mm pitch. Check those values against your drive before ordering.