Timing belt Optibelt 32 T20 / 11200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 T20 / 11200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 T20 / 11200 AFX and any equivalents.
The Optibelt 32 T20 / 11200 AFX is an Alpha Flex timing belt with a T20 profile, a 11200 mm length and a 20 mm pitch. We carry this belt for maintenance, engineering and purchasing teams that need to match a synchronous drive belt by its profile and length. Use the part number on the old belt to confirm the replacement.
Before ordering, read the marking on the back of the belt you are replacing. The profile, T20, and the length, 11200 mm, are the two values to compare first. The pitch of 20 mm is also part of the belt's identification, so check that the old belt and the replacement share it.
If the old belt is worn, cut, or the marking is no longer clear, measure the length and inspect the tooth profile. A belt that matches in profile and length but differs in pitch will not run correctly on the same pulleys. When you contact us, send the full part number 32 T20 / 11200 AFX, or the profile and length you measured.
The 32 T20 / 11200 AFX is built for synchronous drives where the belt teeth mesh with pulley grooves to maintain timing. Confirm the replacement against the drive's pulleys before installation, and inspect the pulleys for wear or damage at the same time.
Dimensions
- Profile
- T20
- Pitch
- 20mm
- Length
- 11200mm
Frequently asked questions
- How do I match the Optibelt 32 T20 / 11200 AFX to the belt I am replacing?
- Compare the profile, T20, the length, 11200 mm, and the pitch, 20 mm, from the marking on the old belt. If the marking is unreadable, measure the length and check the tooth profile against the replacement.
- What information should I send to request a quote?
- Send the part number 32 T20 / 11200 AFX, or the profile and length from the old belt. If you have the old belt in hand, a photo of the back marking helps confirm the match.
- Does this belt come in other profiles or lengths?
- The 32 T20 / 11200 AFX is a specific T20 profile belt with a 11200 mm length and a 20 mm pitch. If your drive uses a different profile or length, send those details and we can help identify the correct belt.