Timing belt Optibelt 32 T10 / 1300 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 T10 / 1300 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 T10 / 1300 AFX and any equivalents.
The Optibelt 32 T10 / 1300 AFX is a timing belt from the Alpha Flex series. It has a T10 profile, a 1300 mm length and a 10 mm pitch. If you are replacing a belt on a drive, use these three values to match the belt you are removing.
Start with the marking on the back of the old belt. The profile, length and pitch on this Optibelt belt are T10, 1300 mm and 10 mm. A T10 profile will not interchange with another profile, and the length must match the drive. Confirm the belt width against the pulley groove before you order.
If the marking is worn off, measure the old belt. Count the teeth and note the tooth pitch, then compare the result with the 10 mm pitch and the 1300 mm length of this belt. Check the pulley grooves for wear and confirm the belt sits correctly. Replace the belt if the teeth are damaged or the backing is cracked.
Send the part number 32 T10 / 1300 AFX, or the marking from the old belt, by WhatsApp or email. The team can confirm the right belt or suggest an equivalent. Include the drive details and the quantity you need so the reply is accurate.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 1300mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Check the marking on the back of the old belt for the profile and length. This belt is T10 profile, 1300 mm length, 10 mm pitch. If the marking is not readable, measure the old belt and count the teeth.
- Can I use this belt if my old belt has a different profile?
- No. The profile must match the pulley grooves. This belt has a T10 profile and a 10 mm pitch. A different profile will not seat correctly in the drive.
- What information should I send for a quote?
- Send the part number 32 T10 / 1300 AFX or the marking from the old belt. Include the drive details and the quantity you need.