Timing belt Optibelt 32 DT10 / 2600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 DT10 / 2600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 DT10 / 2600 AFX and any equivalents.
This Optibelt 32 DT10 / 2600 AFX belt is a double-sided timing belt from the Alpha Flex series. It has a 2600 mm length. If you are replacing a belt on a drive that needs teeth on both sides, this profile and length are the two numbers to match.
The 32 DT10 profile identifies a double-sided timing belt with a specific tooth pitch and width, while 2600 mm is the belt's length. Both values matter: a belt with the wrong profile will not seat correctly in the pulleys, and a belt with the wrong length will not tension properly. Use the marking on the back of your old belt to confirm the profile and length before ordering.
This is a double-sided timing belt, so it is used where the belt drives pulleys from both faces. When you inspect the drive, check the pulley teeth for wear or debris and confirm that the flanges and guides are in good condition. A worn pulley can damage a new belt quickly, so address any issues before installation.
To request a quote, send the part number 32 DT10 / 2600 AFX by WhatsApp or email. If you are unsure whether this is the correct belt, include the old belt's marking and a few photos of the drive. Our team will confirm the profile and length and help you identify the right replacement.
Dimensions
- Length
- 2600mm
Frequently asked questions
- What do the profile and length mean on this belt?
- The 32 DT10 profile describes the double-sided tooth geometry, and 2600 mm is the belt length. Both must match your drive for the belt to fit and run correctly.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of your old belt. If it shows 32 DT10 / 2600 AFX, this is the same profile and length. If you are unsure, send us the old marking and photos of the drive.
- What should I send to get a quote?
- Send the part number 32 DT10 / 2600 AFX by WhatsApp or email. If you need help confirming the belt, include the old belt's marking and photos of the pulleys and drive arrangement.