Timing belt Optibelt 32 AT5K6 / 6200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 AT5K6 / 6200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 AT5K6 / 6200 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by its AT5 profile and 6200 mm length. The 5 mm pitch is the defining dimension for matching this synchronous belt to your drive. Use the part number 32 AT5K6 / 6200 AFX when you request a quote.
The AT5 profile and 6200 mm length are the two numbers to confirm before ordering. The 5 mm pitch tells you the spacing between tooth centers, so it must match the pulley the belt runs on. If the old belt is still on the drive, read the marking on the back and compare it with 32 AT5K6 / 6200 AFX.
For a quote, send the part number and the quantity you need. If the marking is worn or you are unsure of the profile or length, send a photo of the belt and the drive. The team can help confirm the right belt or suggest an equivalent.
This is a timing belt, also called a synchronous belt, so it is used where the drive needs tooth engagement rather than friction. Check the pulleys for wear and make sure the belt is tensioned to the drive manufacturer's specification. On multi-belt drives, replace all belts at the same time so the load stays even.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 6200mm
Frequently asked questions
- What do I need to send to get a quote for this belt?
- Send the part number 32 AT5K6 / 6200 AFX and the quantity. If you have the old belt, include the marking from the back so we can confirm the profile and length.
- How do I confirm the AT5 profile and 6200 mm length are correct?
- Check the marking on the old belt and compare it with 32 AT5K6 / 6200 AFX. The AT5 profile has a 5 mm pitch, so the pulley must match that pitch. If you are unsure, send a photo of the belt and the drive.
- Should I replace all belts on the drive at once?
- Yes. On drives with more than one belt, replacing them as a set keeps tension and load even across the drive.