Timing belt Optibelt 32 AT5K6 / 10200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 AT5K6 / 10200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 AT5K6 / 10200 AFX and any equivalents.
This Optibelt Alpha Flex timing belt carries the part number 32 AT5K6 / 10200 AFX. The AT5 profile and 10200 mm length define the belt's fit on the drive, and the 5 mm pitch is the center-to-center distance between teeth. Use these three values to confirm the belt matches your application before requesting a quote.
The AT5 profile is a synchronous belt tooth geometry, and the 5 mm pitch indicates the spacing between adjacent teeth along the belt. The 10200 mm length is the datum length for this belt. When you compare a replacement, the profile, pitch and length must all agree with the original belt's marking.
The Alpha Flex series from Optibelt is built for drives that need precise synchronization between the pulley and the belt. The 32 AT5K6 / 10200 AFX is a long-length timing belt, so confirm that the full part number on the back of your existing belt matches before ordering. If the marking is worn or unreadable, send a photo of the belt and the drive pulleys for identification.
To request a quote, send the part number 32 AT5K6 / 10200 AFX by WhatsApp or email. Include the belt width and the number of teeth if you have them, along with any other markings on the belt. Our team can confirm the belt or suggest an equivalent when the original is not clear.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 10200mm
Frequently asked questions
- What do the AT5 profile and 5 mm pitch mean on this belt?
- AT5 is the tooth profile, and 5 mm is the pitch, or the distance from one tooth center to the next. Both must match the pulleys on your drive for the belt to seat and run correctly.
- How do I confirm the 10200 mm length is correct?
- Check the marking on the back of your existing belt. If it reads 32 AT5K6 / 10200 AFX, the length matches. If the marking is gone, measure the old belt or send us the drive details and we will help identify it.
- What information should I send with my quote request?
- Send the part number 32 AT5K6 / 10200 AFX, the belt width if known, and any other markings from the belt. A photo of the belt and the pulleys helps us confirm the correct replacement.