Timing belt Optibelt 32 AT5 / 7200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 AT5 / 7200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 AT5 / 7200 AFX and any equivalents.
This Optibelt Alpha Flex belt is a timing belt with an AT5 profile and a 7200 mm length. It is used on drives where synchronous power transmission and exact positioning are required. Confirm fit by matching the profile, length and pitch to your drive.
The AT5 profile and 5 mm pitch define how the belt engages the pulleys. The 7200 mm length sets the center distance and the number of teeth in mesh. Before ordering, read the marking on the back of the old belt and compare it with 32 AT5 / 7200 AFX.
Timing belts in this range are common on large, slow-turning drives where slip is not acceptable. Inspect the pulleys for wear, check alignment, and verify that the belt tracks correctly. If the drive runs more than one belt, replace the full set so the load is shared evenly.
To request a quote, send the part number 32 AT5 / 7200 AFX by WhatsApp or email. If you are unsure of the exact belt, include the profile, length and pitch from the old marking, and our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 7200mm
Frequently asked questions
- How do I confirm that 32 AT5 / 7200 AFX is the right belt for my drive?
- Check the marking on the back of the old belt. It should show the profile AT5, the length 7200 mm and the pitch 5 mm. Match those values to this belt before ordering.
- What does the AT5 profile mean for my application?
- AT5 is a timing belt profile that runs in matching AT5 pulleys. The 5 mm pitch determines how the teeth engage the pulley grooves. Use it only with pulleys cut for the same profile and pitch.
- What information should I send with my quote request?
- Send the part number 32 AT5 / 7200 AFX. If you are replacing a belt with a different marking or need help identifying the correct one, include the profile, length and pitch from the old belt so we can confirm the match or suggest an equivalent.