Timing belt Optibelt 32 AT5 / 3200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 AT5 / 3200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 AT5 / 3200 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 32 AT5 / 3200 AFX. It has an AT5 profile, a 3200 mm length, and a 5 mm pitch. Use these three values to confirm the belt matches your drive before you request a quote.
Timing belts in this profile and length are common on industrial drives where synchronous motion is required, such as positioning axes, conveyor sections, and auxiliary drives on production equipment. The AT5 profile and 5 mm pitch define the tooth geometry that must match the pulleys. The 3200 mm length sets the center distance. If your existing belt is marked with the same profile and length, this Optibelt Alpha Flex belt is the correct size.
To confirm fit, read the marking on the back of the old belt and compare it with 32 AT5 / 3200 AFX. Check that the profile is AT5 and the length is 3200 mm. Also inspect the pulleys for worn teeth, the belt for cracks or missing teeth, and the drive for proper tension and alignment. Replacing a timing belt is best done before failure, and on drives with multiple belts, replace all belts in the set at the same time.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 3200mm
Frequently asked questions
- What does the code 32 AT5 / 3200 AFX mean?
- It identifies an Optibelt Alpha Flex timing belt with an AT5 profile and a 3200 mm length. The 5 mm pitch is the distance between tooth centers. Use these values to match your drive.
- How do I confirm this belt fits my drive?
- Check the marking on your old belt. If it shows AT5 profile and 3200 mm length, this belt is the correct size. Also verify the pulley profile and tooth count.
- What should I send for a quote?
- Send the part number 32 AT5 / 3200 AFX, the quantity, and any details from the old belt marking. If you have a photo of the belt or the drive, include it. We will confirm the belt or suggest an equivalent.