Timing belt Optibelt 32 AT5 / 10800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 AT5 / 10800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 AT5 / 10800 AFX and any equivalents.
The Optibelt 32 AT5 / 10800 AFX is a timing belt from the Alpha Flex series, and we carry it for drives that run on an AT5 profile. This page covers what to check on the belt you are replacing so the new one matches the drive.
Start with the marking on the back of the belt you are removing. It should read 32 AT5 / 10800 AFX, or at least show the AT5 profile and the 10800 mm length. If the old belt is worn or the print has rubbed off, measure the length along the back and confirm the profile and the 5 mm pitch against the pulleys before you order.
The AT5 profile and the 5 mm pitch identify the tooth form and spacing that must engage the pulleys. The 10800 mm length is the belt length, and the 32 in the part number belongs to the Optibelt designation, so quote the full code when you write to us. Send the part number by WhatsApp or email and our team will confirm it or suggest an equivalent.
If the drive runs more than one belt, replace them as a set and check pulley wear, alignment and tension at the same time. A belt that tracks off-center or shows uneven tooth wear usually points to a drive problem rather than the belt itself.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 10800mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. It should show the AT5 profile, the 10800 mm length and the 5 mm pitch. If the marking is unreadable, measure the length and check the profile against the pulleys.
- What do I need to send for a quote?
- Send the full part number, 32 AT5 / 10800 AFX, by WhatsApp or email. If you are not sure of the number, send the marking from the old belt or the profile, length and pitch you measured.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replace the belts as a set so they share the load evenly. Check pulley wear, alignment and tension at the same time.