Timing belt Optibelt 32 AT20 / 8200 AFX

OPTIBELT 32 AT20 / 8200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 AT20 / 8200 AFX and any equivalents.

This is an Optibelt Alpha Flex timing belt with the code 32 AT20 / 8200 AFX. Its profile is AT20 and its length is 8200 mm, with a pitch of 20 mm. Those three values are what you match against the drive before you order.

The profile and the length do the work here. AT20 sets the tooth form and the 20 mm pitch, so the pulleys on the drive have to be cut for that pitch. The 8200 mm length is the belt's own length, and it is the number that decides whether the belt wraps the existing sprockets correctly. If either value is wrong, the belt will not seat or tension properly.

The simplest way to confirm the belt is to read the marking on the back of the old one and compare it with this code. Where a drive runs more than one belt, replace them as a set so the load stays even across the pulleys. Before fitting, check the pulleys for worn teeth and the flanges for damage, and confirm the tension is set to the drive manufacturer's specification.

If you are working from a drawing, a photo of the back marking or the old belt itself, send the code 32 AT20 / 8200 AFX with your quantity and we will confirm it against your request. If the marking is unreadable, send the profile, the length and the pitch you measured.