Timing belt Optibelt 32 / AT10 8000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 / AT10 8000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 / AT10 8000 AFX and any equivalents.
The Optibelt 32 / AT10 8000 AFX is an Alpha Flex timing belt with an AT10 profile, an 8000 mm length and a 10 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs, corrosion or build-up that can damage the belt teeth. Confirm the shafts turn freely, the bearings are sound, and the tensioner moves through its full range. Align the pulleys so the belt tracks straight, and clean the drive area before installation.
Measure the old belt and compare its marking with the 32 / AT10 8000 AFX. The profile is AT10 and the length is 8000 mm, with a 10 mm pitch. If the drive has more than one belt, inspect all of them and replace them as a set so the load stays even.
Send the part number and the quantity you need by WhatsApp or email. If you are unsure about the belt on the drive, send the marking from the back of the old belt and a photo of the sheaves, and we will help confirm the right Optibelt belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 8000mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the marking on the back of the old belt with the 32 / AT10 8000 AFX. The profile is AT10, the length is 8000 mm and the pitch is 10 mm. If the marking is unreadable, send a photo of the drive and the sheaves.
- What should I check on the drive before fitting the new belt?
- Inspect the sheaves for wear, burrs or build-up, check that the shafts turn freely and the tensioner moves correctly, and align the pulleys so the belt tracks straight. Clean the drive area before installation.
- Can you help if I need more than one belt for the same drive?
- Yes. Send the part number and the quantity you need by WhatsApp or email. If the drive uses multiple belts, we can help you confirm the set.