Timing belt Optibelt 32 AT10 / 10200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 AT10 / 10200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 AT10 / 10200 AFX and any equivalents.
This Optibelt Alpha Flex timing belt carries the part number 32 AT10 / 10200 AFX. It has an AT10 profile, a 10200 mm length and a 10 mm pitch. Use these three values to match it against the belt you are replacing.
Start with the marking on the back of the old belt. The replacement must carry the same part number, 32 AT10 / 10200 AFX, or the same profile and length: AT10 and 10200 mm. The 10 mm pitch is the center-to-center distance between teeth, so it has to agree as well. If the marking is worn or unreadable, measure the length along the back of the belt and count the teeth to confirm the profile.
A timing belt is not a place to substitute by eye. A different profile, pitch or length will not seat correctly on the pulleys, and the drive will not run as designed. Check the pulleys for worn teeth, the flanges for damage and the tensioner for smooth travel before the new belt goes on. If the drive uses more than one belt, replace the full set so all belts share the load equally.
We carry the Optibelt Alpha Flex line and supply belt 32 AT10 / 10200 AFX to maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. Send the part number by WhatsApp or email and our team will confirm the belt or suggest an equivalent. If you have the old belt in hand, send a photo of the back marking and the pulley teeth.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 10200mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the part number on the back of the old belt with 32 AT10 / 10200 AFX. If it matches, the profile, length and pitch match. If the marking is gone, measure the length and check that the profile is AT10 with a 10 mm pitch.
- What should I send with my quote request?
- Send the part number 32 AT10 / 10200 AFX by WhatsApp or email. A photo of the old belt's back marking and of the pulley teeth helps us confirm the match or suggest an equivalent.
- Should I replace more than one belt at a time?
- If the drive runs multiple belts, replace them as a set. Belts that have run together wear together, and mixing a new belt with used ones can leave the load unevenly shared.