Timing belt Optibelt 306 3M 6
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- HTD
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 306 3M 6 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 306 3M 6 and any equivalents.
This Optibelt HTD 306 3M 6 is a timing belt in the HTD series with an HTD 3M profile and a 306 mm length. The 3 mm pitch identifies the tooth spacing, so you can confirm the belt matches your drive before ordering.
The profile and length are the two numbers to check first. HTD 3M is a synchronous profile with a 3 mm pitch, and this belt is 306 mm long. If your old belt is marked 306 3M 6, this is the same size. The 6 indicates the belt width in the Optibelt part number, but the profile and length are what locate the correct part.
Timing belts wear at the teeth and cords, and a belt that has run loose or misaligned can damage the pulleys. Inspect the pulleys for worn grooves, check the tensioner, and replace the belt if you see missing teeth, cracks or exposed cord. On drives with more than one belt, replace the full set so the load stays even.
To request a quote, send the part number 306 3M 6, the quantity, and the drive or equipment it fits. If you are unsure, send a photo of the back of the old belt showing the marking, and we will confirm the profile and length. We carry Optibelt belts and reply promptly by WhatsApp or email.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 306mm
Frequently asked questions
- What do the numbers in 306 3M 6 mean?
- The 306 is the length in millimeters, 3M is the HTD profile with a 3 mm pitch, and 6 is the width code in the part number. Use the profile and length to match your drive.
- How do I confirm this belt fits my drive?
- Check the marking on the back of your old belt. If it reads 306 3M 6, this is the same size. You can also measure the length and count the teeth to confirm the 3 mm pitch.
- What should I send for a quote?
- Send the part number 306 3M 6, the quantity you need, and the equipment it fits. A photo of the old belt marking helps us confirm the correct belt.