Timing belt Optibelt 300 / H 1810 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 300 / H 1810 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 300 / H 1810 AFX and any equivalents.
This Optibelt Alpha Flex timing belt carries the part number 300 / H 1810 AFX. It has an H profile and a length of 4597.4 mm. Use the profile and length to confirm it against the belt you are replacing.
The H profile sets the tooth shape and pitch that the pulleys on your drive must match. The 4597.4 mm length is the datum for the belt run, so check it against the marking on the old belt or the drive specification before you order. If the profile is right but the length differs, the belt will not tension correctly.
For a quote, send the part number 300 / H 1810 AFX, the profile H, and the length 4597.4 mm. If you are unsure, photograph the back of the old belt so the marking is readable, and include the pulley tooth count and center distance. We carry Optibelt Alpha Flex timing belts and can confirm the right belt or suggest an equivalent from the details you send.
Timing belts are often replaced as a set with the pulleys and tensioners they run on. Inspect the pulley teeth for wear, the tensioner for free rotation, and the belt for cracked teeth or exposed cord. Replacing the belt alone on worn pulleys shortens the life of the new belt, so note the condition of the whole drive when you request a quote.
Dimensions
- Profile
- H
- Length
- 4597.4mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile is H, which defines the tooth shape and pitch. The length is 4597.4 mm. Both must match your drive for the belt to fit and tension correctly.
- How do I confirm this is the belt I need?
- Compare the part number 300 / H 1810 AFX, the profile H, and the length 4597.4 mm with the marking on your old belt or your drive documentation. If the marking is worn, send a photo and the pulley details.
- What should I send to request a quote?
- Send the part number 300 / H 1810 AFX, the profile H, and the length 4597.4 mm. If you are replacing an unmarked belt, include the pulley tooth count and center distance so we can confirm the right belt or suggest an equivalent.