Timing belt Optibelt 300 / H 1495 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 300 / H 1495 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 300 / H 1495 AFX and any equivalents.
The Optibelt 300 / H 1495 AFX is a timing belt in the Alpha Flex series with an H profile and a length of 3797.3 mm. Before you fit this belt, inspect the drive and sheaves to catch the conditions that can shorten belt life.
Check the sheaves for worn grooves, burrs or debris, and confirm that the flanges are secure. Misalignment between the pulleys will cause the belt to track off-center and wear the edges. Verify that the shafts turn freely and that the bearings have no play, since a bad bearing will load the new belt unevenly.
Look for oil or grease on the drive. Clean any contamination from the sheaves and surrounding area. Confirm that the take-up adjustment has enough travel to tension the belt correctly. If the old belt failed early, find the cause before you install the Optibelt 300 / H 1495 AFX, otherwise the replacement may fail the same way.
The belt is identified by the marking on the back: 300 / H 1495 AFX. For a quote, send that complete code and the quantity you need. If you want to confirm this is the right belt for your drive, include the drive make and model, the pulley part numbers, and the center distance. MR serves maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America, and we reply promptly by WhatsApp or email.
Dimensions
- Profile
- H
- Length
- 3797.3mm
Frequently asked questions
- How do I identify this belt on the old part?
- Look for the code 300 / H 1495 AFX printed on the back of the belt. That full code identifies the Optibelt Alpha Flex timing belt with H profile and 3797.3 mm length. Send it to us for a quote.
- What should I check on the drive before installing this belt?
- Inspect the sheaves for wear, burrs or debris, check alignment between pulleys, and make sure the shafts spin freely. Clean any oil or grease from the sheaves. Confirm that the tensioner has enough adjustment to tighten the belt properly.
- What information do you need to quote this belt?
- Send the complete code 300 / H 1495 AFX and the quantity you need. If you want us to confirm the fit, include the drive make and model, pulley part numbers, and center distance. We reply promptly by WhatsApp or email.