Timing belt Optibelt 30 / 8M 8200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 30 / 8M 8200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 30 / 8M 8200 AFX and any equivalents.
The Optibelt 30 / 8M 8200 AFX is an Alpha Flex timing belt with an HTD 8M profile and an 8200 mm length. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs, corrosion or buildup, and confirm they are aligned and securely mounted. Verify that the shaft bearings turn freely and that the structure holding the drive is rigid. On a belt this long, small alignment errors can affect how the belt tracks and wears.
Look at the old belt as you remove it: note uneven wear, cracks or damaged teeth, and trace any cause back to the drive rather than the belt alone. Clean the sheaves and check that the correct HTD 8M profile seats properly. Handle the new belt without sharp bends or forcing it over flanges.
Once fitted, set tension according to your drive requirements and recheck alignment before running under load. If you are unsure of the correct replacement, send the part number 30 / 8M 8200 AFX and your drive details to our team by WhatsApp or email. We carry Optibelt Alpha Flex belts and can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 8200mm
Frequently asked questions
- What are the profile and length of this Optibelt belt?
- It is an HTD 8M profile timing belt with a length of 8200 mm.
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, damage and alignment, confirm the bearings turn freely, and make sure the drive structure is rigid and clean.
- How do I request a quote for the 30 / 8M 8200 AFX?
- Send the part number 30 / 8M 8200 AFX to our team by WhatsApp or email. We will confirm the belt or suggest an equivalent.