Timing belt Optibelt 30 / 8M 3000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 30 / 8M 3000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 30 / 8M 3000 AFX and any equivalents.
This Optibelt Alpha Flex timing belt carries the part number 30 / 8M 3000 AFX. It uses the HTD 8M profile with an 8 mm pitch and a 3000 mm length. Use these three values to match it against the belt you are replacing.
Start with the marking on the back of the old belt. The profile must read HTD 8M, the length must read 3000 mm, and the pitch is 8 mm. If the belt on the drive is worn or the marking is unreadable, measure the length along the belt and confirm the tooth profile before ordering.
The 30 / 8M 3000 AFX is a timing belt, so it is selected by profile and length rather than by cross-section. A belt with the same 8M profile but a different length will not fit the same drive. Confirm both the profile and the 3000 mm length against the replacement before installation.
Send the part number 30 / 8M 3000 AFX, or the marking from the old belt, by WhatsApp or email. Include the belt width and the drive details if you have them, and the team will confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 3000mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Check the marking on the belt being replaced. It should show the HTD 8M profile and a 3000 mm length. The 30 / 8M 3000 AFX matches those profile and length values.
- What information should I send with my quote request?
- Send the part number 30 / 8M 3000 AFX, or the full marking from the old belt. If you have the belt width or drive details, include those as well so the team can confirm the match.
- Can I use a belt with the same profile but a different length?
- No. A timing belt is matched to the drive by both profile and length. The 30 / 8M 3000 AFX is an HTD 8M profile with a 3000 mm length, so a different length will not fit the same drive.