Timing belt Optibelt 30 / 8M 10600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 30 / 8M 10600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 30 / 8M 10600 AFX and any equivalents.
This page covers the Optibelt 30 / 8M 10600 AFX timing belt from the Alpha Flex series. It is an HTD 8M profile belt with a length of 10600 mm and a pitch of 8 mm. Before you fit it, inspect the drive and the sheaves so the new belt starts on a sound system.
A belt change is the moment to look at everything the belt touches. Check the sheaves for worn grooves, burrs, corrosion or buildup, since any of these will shorten the life of a new belt. Confirm the two shafts are still parallel and the sheaves are aligned, and check that the bearings turn freely and that the structure holding the drive is rigid. On a long center distance, even a small misalignment adds up over the full wrap.
Check the tensioning arrangement as well. Confirm the take-up has enough travel left to tension the belt correctly and that the fasteners hold. A belt of 10600 mm is not a small item to refit, so getting the drive right the first time saves a second shutdown.
To request a quote, send us the part number 30 / 8M 10600 AFX, or the profile and length from the back of the old belt. If you are unsure of the number, a photo of the marking and the drive is enough for our team to confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 10600mm
Frequently asked questions
- What are the profile and length of this Optibelt belt?
- It is an HTD 8M profile timing belt with a length of 10600 mm and a pitch of 8 mm.
- What should I check on the drive before fitting it?
- Inspect the sheaves for wear, burrs and buildup, confirm shaft alignment and parallel condition, check the bearings and the rigidity of the drive structure, and make sure the tensioning take-up still has travel left.
- How do I get a quote?
- Send the part number 30 / 8M 10600 AFX by WhatsApp or email. If the marking is worn, send the profile and length from the old belt or a photo of the drive and our team will confirm the belt or suggest an equivalent.