V-belt Optibelt 3-SPC 4000 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3-SPC 4000 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3-SPC 4000 BP2 and any equivalents.
This Optibelt KB Blue Power 2 belt is a banded V-belt with part number 3-SPC 4000 BP2 and a length of 4000 mm. Banded V-belts are used on drives with multiple parallel grooves where the belt must run as a single unit. Send the part number to our team to confirm it for your drive.
Banded V-belts are common on high-power industrial drives such as large fans, mills, crushers, and compressors, where several V-belts run side by side and must stay matched. The band ties the belts together to keep them from turning over or whipping. This belt is 4000 mm long and carries the Optibelt KB Blue Power 2 series name.
To confirm fit, read the marking on the back of the old belt and compare it to 3-SPC 4000 BP2. Check the pulley grooves for wear, oil, or debris, and make sure the sheave alignment is correct before installing a new belt. If the old marking is unreadable, measure the outside length and note the number of ribs or grooves on the pulleys.
We supply this Optibelt belt to maintenance, engineering, and purchasing teams across the United States, Canada, Mexico, and South America. Send the part number 3-SPC 4000 BP2 by WhatsApp or email with the drive details, and our team will confirm the belt or suggest an equivalent.
Dimensions
- Length
- 4000mm
Frequently asked questions
- How do I confirm that 3-SPC 4000 BP2 fits my drive?
- Compare the marking on the back of your old belt with 3-SPC 4000 BP2. If it matches, the belt is the same profile and length. If the marking is worn, send us the drive make and model, pulley diameters, and the number of grooves.
- Can I replace only one belt on a banded drive?
- Banded V-belts are designed to run as a set, so replace the complete belt. Mixing a new belt with old ones can cause uneven tension and premature failure. Order the full number of belts required for the drive.
- What information should I send with my quote request?
- Send the part number 3-SPC 4000 BP2 and, if possible, a photo of the old belt marking and the drive nameplate. That helps us confirm the correct belt or identify a suitable alternative.