V-belt Optibelt 3-E 10000
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3-E 10000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3-E 10000 and any equivalents.
The Optibelt 3-E 10000 is a banded V-belt from the KB VB series. Its 10000 mm length and banded construction make it suited to drives that need multiple belts to work as a single unit. Use the profile and length to confirm it matches your drive before you request a quote.
The 3-E profile indicates a banded V-belt with three joined strands, which helps keep belts from turning over or whipping on high-impact drives. The 10000 mm length is the datum length for this belt, so check that your drive's required length matches this figure. Banded V-belts are commonly used where a single belt would not carry the load or where pulsating loads are present.
When matching this belt to an existing drive, read the marking on the back of the old belt. If it shows 3-E 10000, this Optibelt belt is the correct size. If the marking is worn or missing, measure the drive's pitch length and compare it to the 10000 mm specification. Replacing banded belts as a complete set helps maintain even tension across all strands.
To request a quote, send the part number 3-E 10000 and the quantity you need by WhatsApp or email. If you are unsure whether this is the right belt for your application, include the drive details and a photo of the old belt's marking. Our team can confirm the profile and length or suggest an equivalent.
Dimensions
- Length
- 10000mm
Frequently asked questions
- What does the 3-E profile mean on this Optibelt belt?
- The 3-E indicates a banded V-belt with three joined strands. This construction keeps the belts aligned and reduces vibration on drives that use multiple belts.
- How do I confirm the 10000 mm length is correct for my drive?
- Check the marking on your old belt. If it reads 3-E 10000, this belt matches. If not, measure the drive's required length and compare it to the 10000 mm specification.
- What information should I send with my quote request?
- Send the part number 3-E 10000 and the quantity you need. If you want us to verify the belt, include the drive details and a photo of the old belt's marking.