V-belt Optibelt 3-D 6477
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3-D 6477 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3-D 6477 and any equivalents.
The Optibelt 3-D 6477 is a banded V-belt from the KB VB series, with a length of 6477 mm. To match it to the belt being replaced, confirm the part number and the length on the belt you are removing. This page covers what to check before you request a quote.
Start with the marking on the back of the old belt. Read the part number and the length, and compare them with the Optibelt 3-D 6477, KB VB series, 6477 mm. A banded V-belt ties several V-belts together, so the number of ribs and the profile matter as much as the length. If the marking is worn or unreadable, measure the outside length of the old belt and note the profile before you contact us.
Because this is a banded V-belt, it is normally replaced as a complete set rather than one strand at a time. Check the sheaves for wear, alignment and debris while the belt is off, and inspect the other belts on the same drive. Send the part number, the length and the profile from the old belt, and our team will confirm the Optibelt 3-D 6477 or suggest an equivalent.
Dimensions
- Length
- 6477mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Compare the part number and the 6477 mm length marked on the old belt with the Optibelt 3-D 6477. Note the profile and the number of ribs as well, since a banded V-belt must match the drive it runs on.
- What should I send to request a quote?
- Send the part number 3-D 6477, the length and the profile from the belt you are replacing. If the marking is not readable, send the dimensions you measured and a photo of the old belt.
- Can you help if the exact belt is not the right match?
- Yes. Send the details from the old belt and our team will review the Optibelt 3-D 6477 against your drive and suggest an equivalent if needed.