V-belt Optibelt 3-B 1700
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3-B 1700 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3-B 1700 and any equivalents.
The Optibelt 3-B 1700 is a banded V-belt from the KB VB series, with a 1700 mm length. When you need to replace a belt on a multi-groove drive, matching the part number and length is the first step. This belt is built for drives that require multiple V-belts to run as a single unit.
To match this belt to the one being replaced, check the marking on the back of the old belt. The part number 3-B 1700 identifies the profile and the length in millimeters. The 1700 mm length is the datum length, and the 3-B indicates a banded construction with three B-section belts joined by a tie band. If your old belt shows the same part number, this is the correct replacement.
Banded V-belts are used where multiple belts must operate in parallel without turning over or jumping out of the grooves. Because the belts are joined, they maintain consistent tension across all grooves. When replacing a banded belt, inspect the sheaves for wear and alignment, and replace the full set if more than one belt is used on the drive.
If you are unsure whether this is the right belt, send a photo of the old belt's marking and the drive sheave information. Our team can help confirm the part number or suggest an equivalent. We carry the Optibelt 3-B 1700 and can quote it by part number through WhatsApp or email.
Dimensions
- Length
- 1700mm
Frequently asked questions
- How do I confirm the Optibelt 3-B 1700 matches my old belt?
- Look for the part number on the back of the belt you are replacing. If it reads 3-B 1700, this belt has the same profile and 1700 mm length. You can also send a photo of the marking for our team to review.
- Can I replace just one belt on a banded drive?
- Banded V-belts are designed to run as a set. If one belt in the set is worn, replacing all belts on the drive at the same time helps maintain even tension and performance.
- What information should I send for a quote?
- Send the part number 3-B 1700, the quantity needed, and any details about the drive or application. Our team will reply promptly with a quote or help confirm the correct belt.