V-belt Optibelt 3-8V 3000 BP2

OPTIBELT 3-8V 3000 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3-8V 3000 BP2 and any equivalents.

This Optibelt 3-8V 3000 BP2 is a banded V-belt from the KB Blue Power 2 series. The part number tells you the profile and the length: an 8V profile with a 7620 mm length. Use those two values to confirm it against the belt you are replacing.

The 8V profile is the narrow wedge section used in high-capacity industrial drives where a single V-belt would not carry the load. The banded construction ties the ribs together so they run as one unit. The 7620 mm length is the datum you match when checking the old belt or the drive layout.

When you send a quote request, include the full part number 3-8V 3000 BP2 and the length 7620 mm. If the belt on the machine is worn or the marking is unreadable, measure the outside length and note the profile from the sheave groove. We carry Optibelt and can help confirm the right belt or suggest an equivalent.

On a banded drive, replace all belts in the set at the same time and check sheave alignment and groove wear before fitting. A mixed set or worn grooves will shorten the life of the new belts.