V-belt Optibelt 3-8V 2120 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3-8V 2120 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3-8V 2120 BP2 and any equivalents.
The Optibelt KB Blue Power 2 banded V-belt, part number 3-8V 2120 BP2, is a 5385 mm belt for drives that need multiple V-belts to run as one unit. When you are replacing a belt on a banded drive, matching the part number and the marked length is the starting point.
To match this belt to the one being replaced, read the marking on the back of the old belt. The part number 3-8V 2120 BP2 and the 5385 mm length should correspond to the belt you are removing. If the old marking is worn or missing, note the drive and the number of ribs in the band so we can confirm the correct replacement.
Banded V-belts are often replaced as a complete set, because mixing old and new belts in the same band can cause uneven tension. Check the sheaves for wear and alignment before installation, and verify that the replacement belt carries the same profile and length as the original.
We carry the Optibelt KB Blue Power 2 line and can help you confirm this part or suggest an equivalent. Send the part number 3-8V 2120 BP2, the belt marking, or a photo via WhatsApp or email, and our team will reply promptly with a quote.
Dimensions
- Length
- 5385mm
Frequently asked questions
- How do I confirm that 3-8V 2120 BP2 is the right replacement belt?
- Compare the part number and the 5385 mm length against the marking on your old belt. If the marking is not readable, send us the drive details and a photo, and we will help you verify it.
- Can I replace just one belt in a banded set?
- Banded V-belts are typically replaced as a complete set to keep tension even across the band. We can quote the number of belts you need for the drive.
- What information do you need to quote this belt?
- Send the part number 3-8V 2120 BP2, the quantity, and any marking from the old belt. A photo of the belt and the drive also helps us confirm the correct item.