V-belt Optibelt 3-8V 1800 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3-8V 1800 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3-8V 1800 BP2 and any equivalents.
The Optibelt 3-8V 1800 BP2 is a banded V-belt from the KB Blue Power 2 series, with a length of 4572 mm. When you are replacing a belt on an existing drive, the most reliable approach is to match the marking on the belt you are removing. This page covers what to check so the replacement fits the drive correctly.
Start by reading the back of the old belt. Confirm the part number, the series and the length, then compare them with the data for this belt: 3-8V 1800 BP2, KB Blue Power 2, 4572 mm. If the marking is worn or missing, measure the old belt and note the profile and length before you request a quote. A banded V-belt is a single unit with multiple ribs, so the number of ribs and the profile must match the drive.
Inspect the drive while the belt is off. Check the sheave grooves for wear, look for oil or debris, and confirm the sheaves are aligned. If the drive runs more than one belt, replace the full set at the same time so the load is shared evenly. Send the part number, the quantity and the application details by WhatsApp or email, and the team can confirm the belt or suggest an equivalent.
If you are unsure whether this is the correct belt, send a photo of the marking on the old belt along with the drive details. The team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 4572mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt and compare it with 3-8V 1800 BP2, KB Blue Power 2 and 4572 mm. If the marking is not legible, measure the old belt and send the profile and length with your request.
- What should I send to get a quote?
- Send the part number 3-8V 1800 BP2, the quantity you need and any details about the drive. A photo of the old belt marking helps confirm the match. You can send this by WhatsApp or email.
- Should I replace all the belts on a multi-belt drive at once?
- Yes. On a drive that uses more than one belt, replace the full set together so the belts wear evenly and share the load. Order the quantity you need for the complete set.