V-belt Optibelt 3-5V 1320 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3-5V 1320 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3-5V 1320 BP2 and any equivalents.
The Optibelt 3-5V 1320 BP2 is a banded V-belt from the KB Blue Power 2 series, 3353 mm long. Before fitting this belt, inspect the drive and sheaves so the new belt runs true and wears evenly. We carry this belt and quote by part number.
Check sheave grooves for wear, burrs, and buildup, and confirm the sheaves are aligned and tight on the shafts. A banded V-belt ties its ribs together, so a groove that is worn or misaligned can pull the belt out of shape and shorten its life. Confirm that the replacement matches the old belt's marking and the drive's requirements.
Measure the old belt and compare it with the 3353 mm length and the 3-5V profile of the 3-5V 1320 BP2. When a drive uses more than one belt, replace the full set so the belts share the load and do not fight each other. Clean the grooves and check the tension after the first run-in.
Send the part number, the quantity, and the drive details by WhatsApp or email, and our team will reply promptly. If you need help confirming the right belt, include the marking from the back of the old belt and the sheave dimensions.
Dimensions
- Length
- 3353mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the part number on the old belt with the 3-5V 1320 BP2 and check the profile and the 3353 mm length against the drive. If the marking is unreadable, send photos and the sheave dimensions, and we can help confirm the right belt.
- What should I inspect before installing a banded V-belt?
- Look at the sheave grooves for wear, burrs, and buildup, check that the sheaves are aligned and secure, and make sure the grooves are clean. Correct any issue before fitting the belt so it seats properly and wears evenly.
- Should I replace all the belts on a multi-belt drive at once?
- Yes. On a drive that uses more than one belt, replace the full set so the belts share the load. Mixing a new belt with used belts can cause uneven tension and early failure.