V-belt Optibelt 2926V 786
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Vario Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2926V 786 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2926V 786 and any equivalents.
This Optibelt Vario Power 2926V 786 is a variable speed belt with a length of 1996 mm. It is built for drives where the pulley sheaves change diameter to vary speed, commonly found on industrial machinery rather than fixed-ratio drives. Use the part number and length to confirm it matches the belt you are replacing.
Variable speed belts run in adjustable sheaves, so the belt must flex as the groove width changes. The 2926V 786 is identified by its part number and its 1996 mm length. When checking a replacement, read the marking on the back of the old belt and compare it to this part number, then verify the length against the drive documentation or by measuring the old belt.
Because sheave alignment and wear affect how a variable speed belt runs, inspect the pulley faces for grooves, steps or shiny spots before fitting a new belt. If a drive uses more than one belt, replace the full set at the same time so the load stays even. If you are unsure whether this is the correct belt for your equipment, send the part number, the belt marking and the machine details to our team for confirmation.
Dimensions
- Length
- 1996mm
Frequently asked questions
- How do I confirm this Optibelt 2926V 786 fits my drive?
- Check the marking on the back of your old belt and compare it to the part number 2926V 786. Also confirm the length: this belt is 1996 mm. If the old belt is unreadable, measure its length or check the machine manual for the specified belt.
- Where are variable speed belts like this one used?
- They are used on drives with adjustable-diameter pulleys, where the belt position changes to alter the output speed. This is common on industrial equipment that requires speed variation under load, not on fixed-speed drives.
- What should I send to request a quote?
- Send the part number 2926V 786 and the quantity you need. If you are replacing a belt on a specific machine, include the machine make and model and the old belt marking so we can help confirm the correct item.