V-belt Optibelt 28X8 1120
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Vario Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 28X8 1120 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 28X8 1120 and any equivalents.
The Optibelt Vario Power 28X8 1120 is a variable speed belt with a length of 1120 mm. It is used on drives where the effective diameter of one or both sheaves changes to vary speed. Before fitting a new belt, inspect the sheaves and the rest of the drive.
Check the sheave faces for wear, grooves, or steps. Worn faces can prevent the belt from seating correctly and can shorten belt life. Confirm that the sheaves open and close smoothly across their full range and that there is no excessive play or binding in the mechanism.
Look for oil, grease, or debris on the sheave faces and guard. Clean any contamination before installing the new belt. Check the alignment of the shafts and the condition of the bearings. If the drive uses more than one belt, replace all belts at the same time so they work together evenly.
When you request a quote, send the part number 28X8 1120 and the quantity you need. If you are unsure about the exact belt, send a photo of the marking on the back of the old belt and the sheave dimensions. The team will confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 1120mm
Frequently asked questions
- What does the 28X8 1120 marking tell me?
- The marking identifies the belt as an Optibelt Vario Power variable speed belt with a length of 1120 mm. The profile and length are the key dimensions to match when ordering a replacement.
- Why should I inspect the sheaves before fitting a new belt?
- Worn or misaligned sheaves can damage a new belt quickly. Checking sheave faces, movement, and alignment before installation helps the new belt run correctly and last longer.
- What information do you need to quote the 28X8 1120?
- Send the part number 28X8 1120 and the quantity you need by WhatsApp or email. If you want us to confirm the belt, include a photo of the old belt marking and the sheave dimensions.