Timing belt Optibelt 2660 14M 115 HILO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Load
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2660 14M 115 HILO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2660 14M 115 HILO and any equivalents.
This Optibelt Omega High Load belt is a timing belt in the HTD 14M profile, with a 2660 mm length and a 14 mm pitch. The profile sets the tooth form and the pitch sets the spacing between teeth, so the length is what positions the belt on the drive. The three values together are what a buyer needs to match a replacement.
When you read a timing belt marking, the profile and pitch come first and the length confirms the fit. HTD 14M is the tooth form here, and 14 mm is the pitch. The 2660 mm length is the figure to compare against the belt you are replacing, since a belt of the same profile and pitch but a different length will not sit correctly on the pulleys.
The Optibelt Omega High Load line is what we carry under this part number. If you are working from an old belt, the marking on the back is the fastest way to confirm what you have. Send the full code, 2660 14M 115 HILO, along with the profile and length you measured, and the team can check it against this listing.
For a quote, send the part number by WhatsApp or email. If the belt on the drive is worn or the marking is unreadable, include the profile, the pitch and the length in millimeters, plus the pulley tooth counts if you have them. We reply promptly and can help confirm the right belt for the drive.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 2660mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile is HTD 14M, which defines the tooth form, and the pitch is 14 mm, which is the spacing between teeth. The length is 2660 mm. Together these three values identify the belt and let you compare it against the one on the drive.
- How do I confirm this is the belt I need?
- Check the marking on the back of the belt you are replacing and compare the profile, pitch and length. If the marking is worn, measure the length and count the pulley teeth. Send those details with the part number and we can help confirm it.
- How do I request a quote for this belt?
- Send the part number 2660 14M 115 HILO by WhatsApp or email. If you are also considering a replacement for a worn belt, include the profile, pitch and length from the drive so we can check the match.