Timing belt Optibelt 25 T5K6 / 6800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 T5K6 / 6800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 T5K6 / 6800 AFX and any equivalents.
This Optibelt Alpha Flex timing belt carries the part number 25 T5K6 / 6800 AFX. It has a T5 profile, a 6800 mm length and a 5 mm pitch. Before fitting it, inspect the drive and the sheaves.
A new belt will not correct a worn drive. Check the sheaves for worn grooves, burrs, cracks and build-up in the tooth spaces, and confirm the shafts and bearings turn freely without play. Misalignment between the two sheaves will shorten the life of any timing belt, so verify that the pulleys line up before the belt goes on. Tension the belt to the drive manufacturer's specification for a T5 profile belt.
The marking on the back of the old belt is the fastest way to confirm what you need. Read the full string, including the part number, profile and length, and compare it with the data for this belt: T5 profile, 6800 mm length, 5 mm pitch. If the marking is worn away, measure the length and count the teeth rather than relying on a partial number.
Send the part number 25 T5K6 / 6800 AFX, or the marking from the old belt, by WhatsApp or email and we will confirm the belt. If you are replacing more than one belt on the same drive, include the part numbers for the full set so they can be quoted together. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 6800mm
Frequently asked questions
- What should I check on the drive before fitting this Optibelt timing belt?
- Inspect the sheaves for worn grooves, burrs, cracks and build-up in the tooth spaces. Check that the shafts and bearings turn freely, that the two sheaves are aligned, and that the drive is clean before the belt is fitted.
- How do I confirm this is the belt I need?
- Read the marking on the back of the old belt and compare the part number, profile and length with this belt: T5 profile, 6800 mm length, 5 mm pitch. If the marking is not readable, measure the belt and count the teeth.
- What do I send to request a quote?
- Send the part number 25 T5K6 / 6800 AFX, or the full marking from the old belt, by WhatsApp or email. If you are replacing several belts on the same drive, include each part number.