Timing belt Optibelt 25 T5K6 / 5600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 T5K6 / 5600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 T5K6 / 5600 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 25 T5K6 / 5600 AFX. It uses a T5 profile with a 5 mm pitch and a 5600 mm length. Use these three values to confirm the belt matches your drive before you request a quote.
Timing belts in this profile and length range are used on synchronous drives where the belt teeth mesh with matching pulleys to keep the driven shaft in step with the drive. Typical equipment includes industrial machinery, process lines and other drives that need a positive, non-slip transmission. The T5 profile and 5 mm pitch define the tooth geometry; the 5600 mm length defines the belt's path around the pulleys.
To confirm fit, compare the marking on the back of your old belt with the code 25 T5K6 / 5600 AFX. Check that the profile is T5, the pitch is 5 mm and the length is 5600 mm. Also verify the belt width and the pulley grooves against the drive, since those are separate from the profile and length. If the marking is worn or unreadable, measure the old belt and note the pulley tooth profile.
Send the part number, the belt marking or your measurements by WhatsApp or email and the team will reply promptly. They can confirm the belt or suggest an equivalent where one exists.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 5600mm
Frequently asked questions
- How do I confirm this Optibelt belt fits my drive?
- Match the T5 profile, 5 mm pitch and 5600 mm length to your drive and old belt. Also check the belt width and pulley grooves, as those are not defined by the profile and length alone.
- What information should I send for a quote?
- Send the part number 25 T5K6 / 5600 AFX, the marking from the back of the old belt, or your measured profile, pitch and length. Photos of the belt and pulley can help confirm the fit.
- Can you help if I cannot read the old belt marking?
- Yes. Measure the old belt and note the tooth profile and pulley grooves, then send those details by WhatsApp or email. The team will help confirm the right belt or suggest an equivalent.