Timing belt Optibelt 25 T5K6 / 2900 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 T5K6 / 2900 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 T5K6 / 2900 AFX and any equivalents.
The Optibelt 25 T5K6 / 2900 AFX is an Alpha Flex timing belt with a T5 profile, a 2900 mm length and a 5 mm pitch. Timing belts of this type are used where a drive has to keep two shafts turning in step, so the belt teeth engage the pulley grooves instead of relying on friction.
When you are confirming fit, work from the belt you are replacing. Read the marking on the back of the old belt and compare it with the part number above, then check the profile and the length against the drive. The T5 profile and 2900 mm length on this belt are the two figures that decide whether it sits correctly on the pulleys.
Inspect the drive at the same time. Look at the pulley teeth for wear or damage, check that the pulleys are aligned, and confirm the belt tension is set to the drive manufacturer's specification. A belt that has run hot, frayed at the edges or lost teeth usually points to a problem on the drive rather than the belt alone.
If you are ordering for a planned shutdown, send the part number, the quantity and the equipment it goes on. We carry Optibelt and can help confirm the right belt or suggest an equivalent where one applies.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 2900mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Compare the marking on the back of the belt you are removing with the part number above, then check the T5 profile and the 2900 mm length against the drive. If the marking is worn off, send us the machine details and the pulley information.
- What should I include when requesting a quote?
- Send the part number, the quantity you need and the equipment the belt fits. A photo of the belt marking or the drive helps us confirm the correct item.
- Can you help if I am not sure of the part number?
- Yes. Send what you have, such as the old belt marking, the profile and length, or the machine model, and we will help identify the right belt or an equivalent.