Timing belt Optibelt 25 T5K6 / 2600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 T5K6 / 2600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 T5K6 / 2600 AFX and any equivalents.
When you need to replace an existing timing belt, the fastest path is to match the part number and the physical marking on the belt. This Optibelt Alpha Flex belt is identified as 25 T5K6 / 2600 AFX, with a T5 profile and a 2600 mm length. We carry it for maintenance and repair work where the original callout must be respected.
Start by reading the back of the belt you are removing. Confirm that it shows the same code, 25 T5K6 / 2600 AFX, and that the profile is T5. The pitch is 5 mm and the length is 2600 mm. If the old belt is worn or the marking is unreadable, measure the length and count the teeth to verify the profile before ordering.
Because timing belts are often replaced as part of a drive refresh, check the pulleys for wear, debris or damaged teeth. A belt with the correct profile and length will only run correctly if the pulleys are in good condition. If the existing belt is a different brand but carries the same size, this Optibelt belt can serve as the replacement.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 2600mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the part number on the old belt to 25 T5K6 / 2600 AFX. Also verify the profile is T5, the pitch is 5 mm and the length is 2600 mm. If the old belt is not marked, measure the length and check the tooth profile against the pulleys.
- Can I use this belt if the original was a different brand?
- Yes, as long as the profile, pitch and length match. This belt has a T5 profile, 5 mm pitch and 2600 mm length. Confirm those dimensions against your drive before ordering.
- What should I send to request a quote?
- Send the part number 25 T5K6 / 2600 AFX, the quantity you need and any details about the drive. If you are unsure, include a photo of the old belt marking and the pulley profile.