Timing belt Optibelt 25 T20 / 7800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 T20 / 7800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 T20 / 7800 AFX and any equivalents.
When you are replacing a timing belt, the fastest way to confirm you have the right part is to match the profile, pitch and length to the belt in hand. This Optibelt Alpha Flex belt is identified as 25 T20 / 7800 AFX, with a T20 profile, a 20 mm pitch and a 7800 mm length. Use those three figures as your primary check before you request a quote.
Start by reading the marking on the back of the old belt. If it shows T20 profile, 20 mm pitch and 7800 mm length, this Optibelt Alpha Flex belt matches those dimensions. The part number 25 T20 / 7800 AFX can be sent directly to our team by WhatsApp or email for a quote.
If the old marking is worn or missing, measure the pitch and the overall length and compare them to the T20 profile and 7800 mm length listed here. Confirm that the belt width and tooth pattern suit your pulleys before ordering. When the drive runs more than one belt, inspect all belts in the set and replace them together so the load stays even.
We carry the Optibelt Alpha Flex line and can help you confirm this belt or suggest an equivalent based on the data you provide. Send the part number, the old belt marking, or your profile, pitch and length measurements, and our team will reply promptly.
Dimensions
- Profile
- T20
- Pitch
- 20mm
- Length
- 7800mm
Frequently asked questions
- How do I confirm this Optibelt 25 T20 / 7800 AFX belt matches my drive?
- Check the marking on the back of the belt being replaced. It should show a T20 profile, a 20 mm pitch and a 7800 mm length. If those match, this belt is the correct size.
- What should I send to request a quote for this belt?
- Send the part number 25 T20 / 7800 AFX by WhatsApp or email. If you do not have the number, send the old belt marking or your profile, pitch and length measurements instead.
- Should I replace more than one belt at the same time?
- If your drive uses multiple belts, inspect all of them and replace them as a set. Mixing a new belt with worn belts can cause uneven loading across the drive.