Timing belt Optibelt 25 / T10 9600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 / T10 9600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 / T10 9600 AFX and any equivalents.
The Optibelt 25 / T10 9600 AFX is an Alpha Flex timing belt with a T10 profile, a 9600 mm length and a 10 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs, corrosion or debris, and confirm they are aligned and secure. A sheave that has damaged the old belt will damage the replacement, so correct any fault before the belt goes on.
Verify the drive takes a T10 profile belt with a 9600 mm length and a 10 mm pitch, then compare these figures with the marking on the belt you are replacing. Tension and tracking should be set to the drive manufacturer's procedure.
When you request a quote, send the part number 25 / T10 9600 AFX, the belt marking and the drive details. We carry Optibelt belts and can confirm the T10 profile and 9600 mm length against your application.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 9600mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, damage, alignment and security, and confirm the drive is clean and turns freely. Correct any issue before fitting the Optibelt 25 / T10 9600 AFX.
- How do I confirm this is the correct belt?
- Match the T10 profile, the 9600 mm length and the 10 mm pitch to the belt you are replacing and to the drive specification. The part number is 25 / T10 9600 AFX.
- What information should I send with my quote request?
- Send the part number, the marking on the old belt and details of the drive, including the sheave dimensions if you have them. We will confirm the belt for your application.