Timing belt Optibelt 25 T10 / 6000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 T10 / 6000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 T10 / 6000 AFX and any equivalents.
The Optibelt 25 T10 / 6000 AFX is an Alpha Flex timing belt with a T10 profile, a 10 mm pitch and a 6000 mm length. We carry it for maintenance and engineering teams that need the exact profile and length called out on the drive. Before you fit it, inspect the pulleys and the rest of the drive.
A new belt will not correct a worn drive. Check the sheaves for worn grooves, burrs, corrosion or buildup in the tooth spaces, and confirm they are aligned and running true. Look at the shaft bearings, tensioner and any idler for play, noise or rough rotation. If a component is failing, replace it before the belt goes on.
Confirm the marking on the old belt matches the part number you are ordering. This belt is identified by its T10 profile and 6000 mm length, with a 10 mm pitch, so the profile and length on the drive must match. Send the part number and the belt marking when you request a quote, and we will confirm the belt or suggest an equivalent.
Timing belts on long-center drives should be handled with care and fitted without forcing or twisting. Keep the pulleys clean and dry, set tension to the drive maker's specification, and recheck it after the first run-in period. Store the belt flat and away from sharp edges until it is installed.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 6000mm
Frequently asked questions
- What should I check on the drive before fitting this Optibelt timing belt?
- Inspect the pulleys for worn grooves, burrs, corrosion and buildup in the tooth spaces, and check alignment and runout. Look at bearings, tensioners and idlers for play, noise or rough rotation, and replace any failing component before installing the belt.
- How do I confirm this is the correct belt for my drive?
- Compare the profile and length on the drive with the belt: T10 profile, 10 mm pitch and 6000 mm length. The marking on the back of the old belt is the best reference. Send that marking and the part number when you request a quote and we will confirm the belt or suggest an equivalent.
- What information do you need to quote the Optibelt 25 T10 / 6000 AFX?
- Send the part number and the marking from the old belt, along with the drive details you have. We reply by WhatsApp or email and can confirm the right belt or suggest an equivalent.