Timing belt Optibelt 25 T10 / 2400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 T10 / 2400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 T10 / 2400 AFX and any equivalents.
The Optibelt 25 T10 / 2400 AFX is an Alpha Flex timing belt with a T10 profile, a 2400 mm length and a 10 mm pitch. When you are matching it to the belt being replaced, start with the marking on the back of the old belt and compare it with these three values.
Confirm that the old belt reads T10 for the profile, 2400 for the length in millimeters and 25 for the width. The 10 mm pitch is the distance between tooth centers and must agree with the pulley grooves. If the back of the belt is worn or the marking is unreadable, measure the length along the belt and count the teeth to verify the profile and pitch before ordering.
A timing belt that has run its service life should be replaced with the drive inspected at the same time. Check the pulleys for worn teeth, the tensioner and idler for smooth rotation, and the shaft seals for oil or grease that could reach the belt. On drives that use more than one belt, replace all belts in the set so the load is shared evenly.
MR Industrial Accessories LLC supplies this Optibelt Alpha Flex belt to maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. Send the part number 25 T10 / 2400 AFX by WhatsApp or email to request a quote, and the team can confirm the belt or suggest an equivalent.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 2400mm
Frequently asked questions
- How do I match the Optibelt 25 T10 / 2400 AFX to the belt I am replacing?
- Read the marking on the back of the old belt. The replacement must show the same T10 profile, 2400 mm length and 25 width. If the marking is gone, measure the length and confirm the 10 mm pitch against the pulley grooves.
- What should I send to request a quote for this belt?
- Send the part number 25 T10 / 2400 AFX by WhatsApp or email. If you are unsure of the profile or length, include the old belt marking and the drive details so the team can confirm the correct belt or suggest an equivalent.
- Should I replace more than one belt at a time?
- On drives that use multiple belts, replace all belts in the set together and inspect the pulleys, tensioner and idler at the same time. This helps keep the load shared evenly across the drive.