Timing belt Optibelt 25 DT10 / 2300 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 DT10 / 2300 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 DT10 / 2300 AFX and any equivalents.
The Optibelt 25 DT10 / 2300 AFX is an Alpha Flex double-sided timing belt with a length of 2300 mm. When you need to replace a belt on a drive that uses teeth on both sides, the marking on the back of the old belt is the fastest way to confirm the correct part.
Read the old belt before you remove it. The full code, including 25 DT10 / 2300 AFX, identifies the profile and the length. If the back of the belt is worn or dirty, clean it and photograph the marking. That image, along with the part number, is what we need to match your request.
The 2300 mm length and the DT10 profile are the two dimensions to verify. A double-sided timing belt drives pulleys from both faces, so the profile must match the pulley grooves and the length must match the drive path. Use the marking as the primary reference; do not rely on a measured length alone.
If the marking is unreadable, send the machine or drive details and any photos of the pulleys and the belt routing. We carry the Optibelt Alpha Flex line and can help confirm the right belt or suggest an equivalent. Request a quote by part number through WhatsApp or email.
Dimensions
- Length
- 2300mm
Frequently asked questions
- How do I identify the correct replacement for a double-sided timing belt?
- Start with the marking on the back of the old belt. For this Optibelt belt, the code is 25 DT10 / 2300 AFX. The profile and the 2300 mm length are the key data. If the marking is not clear, send photos of the belt and the drive.
- What does the 2300 mm length refer to?
- It is the length of the belt as listed for the Optibelt 25 DT10 / 2300 AFX. Match this value to the old belt's marking and to the drive's requirements. Do not substitute a different length without checking the pulley positions and take-up.
- Can you help if I only have the old belt and no part number?
- Yes. Send a clear photo of the marking on the back of the belt and any drive details. We carry Optibelt belts and can help confirm the right part or suggest an equivalent based on the profile and length.