Timing belt Optibelt 25 AT5K6 / 1500 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 AT5K6 / 1500 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 AT5K6 / 1500 AFX and any equivalents.
This Optibelt Alpha Flex timing belt, part number 25 AT5K6 / 1500 AFX, is a synchronous belt with an AT5 profile, a 1500 mm length and a 5 mm pitch. It is used in drives where exact positioning and synchronized motion are required, such as those found on production machinery, packaging equipment and other industrial systems.
To confirm this belt fits your drive, check that the old belt is marked with the same profile and length. The AT5 profile and 1500 mm length are the key dimensions for matching. The 5 mm pitch is also part of the specification. If the marking on your belt is worn or unreadable, measure the length along the back of the belt and count the teeth to verify the pitch.
When replacing a timing belt, inspect the pulleys for wear, debris or damage, and check the tensioner and idler bearings. A worn pulley can quickly damage a new belt. If the drive uses multiple belts, replace them as a set to maintain even load distribution. After installation, recheck tension and alignment.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 1500mm
Frequently asked questions
- What does the part number 25 AT5K6 / 1500 AFX refer to?
- This is an Optibelt Alpha Flex timing belt with an AT5 profile, a 1500 mm length and a 5 mm pitch. The part number identifies the belt's profile and length.
- How can I confirm this belt is the correct replacement?
- Compare the profile and length marked on your existing belt. The AT5 profile and 1500 mm length must match. If the markings are not clear, measure the belt and count the teeth to verify the 5 mm pitch.
- Can you help me identify the right belt if I send the old part number?
- Yes. Send the part number and any markings from the old belt via WhatsApp or email. Our team will confirm the correct Optibelt belt or suggest a suitable equivalent.