Timing belt Optibelt 25 AT5 / 2900 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 AT5 / 2900 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 AT5 / 2900 AFX and any equivalents.
The Optibelt 25 AT5 / 2900 AFX is an Alpha Flex timing belt with an AT5 profile and a 2900 mm length. This page is for maintenance and purchasing staff who need to confirm it against the belt being replaced. Read the marking on the old belt and compare profile and length before requesting a quote.
The most reliable way to match a timing belt is to read the printing on the back of the belt you are removing. Confirm the profile is AT5 and the length is 2900 mm. The 5 mm pitch is part of the same profile identification. If the old belt is worn, cut, or missing its marking, measure the length along the belt and check the tooth shape against the pulley before ordering.
The part number 25 AT5 / 2900 AFX combines the profile and the length. When you send a quote request, include that full code plus the machine or drive it fits. A photo of the old belt marking and the pulley helps us confirm you are ordering the correct item. If the exact belt is not what you need, we can review the drive data and suggest an equivalent.
For drives that run more than one belt, inspect all belts in the set and replace them together where the drive is designed that way. Check pulley teeth for wear, alignment, and tension during the same service. We carry the Optibelt 25 AT5 / 2900 AFX and respond to quote requests by WhatsApp or email.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 2900mm
Frequently asked questions
- How do I confirm the Optibelt 25 AT5 / 2900 AFX is the right belt for my drive?
- Read the marking on the belt being replaced. The profile should be AT5 and the length 2900 mm. The 5 mm pitch is part of the AT5 profile. If the marking is unreadable, measure the belt length and check the tooth profile against the pulley.
- What information should I send with my quote request?
- Send the full part number 25 AT5 / 2900 AFX, the machine or drive it fits, and a photo of the old belt marking if possible. This helps us confirm the belt and check whether an equivalent is needed.
- Can I replace just one belt in a multi-belt drive?
- On drives that use a set of belts, inspect all belts and replace them together where the drive is designed that way. Also check pulley teeth, alignment, and tension at the same time.