Timing belt Optibelt 25 AT10K13 / 2600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 AT10K13 / 2600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 AT10K13 / 2600 AFX and any equivalents.
The Optibelt 25 AT10K13 / 2600 AFX is a timing belt in the Alpha Flex series. Its marking gives you the two figures that matter most when matching a belt to a drive: an AT10 profile and a 2600 mm length. The pitch is 10 mm.
The profile sets how the teeth engage the pulley. AT10 is the tooth form called out here, and it has to agree with the sprocket on the drive before anything else is checked. The length is the second fixed point: 2600 mm. A belt of the same profile but a different length will not run correctly, and neither will one of the same length with a different tooth form.
Because those two values sit in the part marking, matching is straightforward. Read the back of the old belt and compare it against the profile and the length on this page. If the marking is worn away or the belt has already been removed, measure the length and confirm the tooth form against the pulley.
If you are unsure whether this is the correct belt for the drive, send the part number from the old belt, along with the profile and length you have recorded, by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 2600mm
Frequently asked questions
- What do the profile and length on this belt tell me?
- They are the two values you match first. This belt has an AT10 profile and a 2600 mm length, with a 10 mm pitch. The profile must match the pulley tooth form and the length must match the drive.
- How do I confirm this is the belt on my drive?
- Read the marking on the back of the old belt and compare the profile and length with the figures here. If the marking is no longer readable, measure the length and check the tooth form against the pulley.
- What should I send to request a quote?
- Send the part number 25 AT10K13 / 2600 AFX, or the marking from your old belt, by WhatsApp or email. Include the profile and length you have recorded so the team can confirm the belt or suggest an equivalent.