Timing belt Optibelt 25 AT10 / 880

OPTIBELT 25 AT10 / 880 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 AT10 / 880 and any equivalents.

This Optibelt Alpha Torque timing belt is identified by the code 25 AT10 / 880. It has an AT10 profile and a length of 880 mm, with a pitch of 10 mm. Use these three values to confirm the belt matches your drive before you request a quote.

Timing belts in the AT10 profile are common on drives that need synchronous motion rather than friction. The 880 mm length and 10 mm pitch define the geometry of the belt, so the drive's pulley pitch and center distance must match those figures. If your current belt is marked 25 AT10 / 880, this is the same size.

To confirm fit, read the marking on the back of the old belt and compare it with the code above. Check the pulley grooves for wear and make sure the belt path is clean and free of debris. If the marking is worn away, measure the belt width and count the teeth, then compare the result with the profile and length given here.

Send us the part number 25 AT10 / 880 by WhatsApp or email. If you are unsure whether this is the correct belt for your drive, include the belt marking, the pulley tooth count and the center distance, and our team can help confirm the right belt or suggest an equivalent.