Timing belt Optibelt 25 AT10 / 6200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 AT10 / 6200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 AT10 / 6200 AFX and any equivalents.
Matching a timing belt to the one being replaced starts with the marking on the back of the old belt. This Optibelt Alpha Flex belt carries the code 25 AT10 / 6200 AFX, an AT10 profile and a 6200 mm length. Use those three details to confirm the replacement before installation.
Read the back of the belt you are removing. The code 25 AT10 / 6200 AFX identifies this Optibelt Alpha Flex timing belt. The profile is AT10 and the length is 6200 mm. If the old marking matches these values, the belt is the correct profile and length for the drive. If the marking is worn or unreadable, measure the old belt and compare the profile and length to the data here.
Timing belts are often replaced as part of a drive service. Inspect the pulleys for wear, check alignment, and confirm the tensioning procedure for the drive before fitting the new belt. A belt that matches the original profile and length will seat correctly on the pulleys. Keep the old belt until the replacement is running, so you can compare the markings if needed.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 6200mm
Frequently asked questions
- How do I confirm this Optibelt 25 AT10 / 6200 AFX belt matches my old belt?
- Check the marking on the back of the old belt. It should show the same code, profile AT10, and length 6200 mm. If the marking is not readable, measure the old belt and compare the profile and length to the values on this page.
- What should I send to request a quote for this belt?
- Send the part number 25 AT10 / 6200 AFX, the brand Optibelt, and the quantity you need. If you are replacing an existing belt, include a photo of the back marking or the old belt dimensions so we can confirm the match.
- Can I replace just one belt on a multi-belt drive?
- On drives with multiple belts, replacing all belts at the same time helps maintain even tension and load sharing. If you are unsure, send us the drive details and we can help you confirm the correct replacement approach.