Timing belt Optibelt 25 / AT10 6000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 / AT10 6000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 / AT10 6000 AFX and any equivalents.
The Optibelt 25 / AT10 6000 AFX is a timing belt with an AT10 profile and a 6000 mm length. The 10 mm pitch is set by the profile. If your drive calls for this profile and length, this belt is the direct match.
The AT10 profile and 6000 mm length are the two dimensions that decide fit on a synchronous drive. The 10 mm pitch is fixed by the profile, so the belt will only mesh correctly with pulleys cut for AT10. Check the marking on the back of the old belt: it should read 25 / AT10 6000 AFX or show the same profile and length.
For a quote, send the part number 25 / AT10 6000 AFX and the quantity you need. If you are replacing a belt on a drive that runs more than one belt, order the full set so the drive stays balanced. Our team can confirm the profile and length from your marking and help you match the right belt.
When you inspect the drive, look at pulley wear, alignment and tension before fitting a new belt. A worn pulley or misaligned shaft will shorten the life of any timing belt, including this one. If you are unsure whether the AT10 profile is correct, send a photo of the old belt and the pulley teeth with your request.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 6000mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The AT10 profile means the belt has a 10 mm pitch and will only run on AT10 pulleys. The 6000 mm length is the datum length of the belt, so it fits drives that require that length.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows 25 / AT10 6000 AFX or the same AT10 profile and 6000 mm length, this belt matches. You can also send us the marking and a photo of the pulley.
- What should I send to request a quote?
- Send the part number 25 / AT10 6000 AFX and the quantity you need by WhatsApp or email. If you are replacing multiple belts on the same drive, include the total number so we can quote the set.