Timing belt Optibelt 25 AT10 / 2700 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 AT10 / 2700 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 AT10 / 2700 AFX and any equivalents.
The Optibelt 25 AT10 / 2700 AFX is an Alpha Flex timing belt with an AT10 profile, a 2700 mm length and a 10 mm pitch. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start.
Check the sheaves for worn grooves, burrs, corrosion or buildup that can damage the belt teeth. Confirm the shafts turn freely, the bearings are sound and the two sheaves are aligned. Set the correct center distance and tension according to your drive design. A worn or misaligned drive will shorten the life of any timing belt, including this one.
Confirm the part number on the old belt matches 25 AT10 / 2700 AFX and that the profile and length suit your drive. The AT10 profile and 2700 mm length are the key selection data here. If you are replacing more than one belt on the same drive, fit them as a set so the load is shared evenly.
For a quote, send the part number 25 AT10 / 2700 AFX, the quantity you need and any details from the old belt marking. If you are unsure of the exact belt, share the drive details and we will help confirm the right Optibelt timing belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 2700mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, burrs or buildup, confirm the shafts spin freely and the bearings are in good condition, and verify alignment. Set the correct center distance and tension for your drive.
- How do I identify the Optibelt 25 AT10 / 2700 AFX?
- Look for the part number on the back of the belt. This belt has an AT10 profile, a 2700 mm length and a 10 mm pitch.
- What do you need to quote this belt?
- Send the part number 25 AT10 / 2700 AFX, the quantity required and any marking details from the old belt. If you need help confirming the right belt, include your drive details.